|
|
Influence of particle size of cosmetic pigments on final properties product
Obručová, Kateřina ; Hurčíková, Andrea (referee) ; Zemanová, Jana (advisor)
This diploma thesis is focused on the study of the influence of the of size cosmetics pigments on the properties of the final product. This effect was studied on samples of make-up given by industry partner. Make-up samples were measured by the rheology method and the yield stress of all samples was determined. Scanning electron microscopy was used to determine the size and shape of the pigment particles. Particle size was also measured by dynamic light scattering, but the results were influenced by forming aggregates. To easier determination of the types of pigments in the sample was determined elemental composition of the pigments (Ti, Fe, O, Al) by EDS detector. Due to the unknown composition of make-up, the information was supplemented by X-ray powder diffraction (XRD) analysis, and it was possible to determine the compounds TiO2 (anatase and rutile), FeOOH and Fe2O3. The results obtained by these methods showed what pigments can be found in make-up samples, what their sizes and shapes are. It has been shown that the smaller the pigments are, the higher the viscosity and yield stress of the final product. The higher these quantities, the harder it is to handle the product.
|
|
|
Reological properties of cement pastes modified by amorphous SiO2
Zimmermann, Štěpán ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
The subject of this thesis are the rheological properties of cement paste with the addition of amorphous silicon dioxide. The basic rheological parameters are that describe the behavior of cement pastes in the fresh state. The work also included rheological tests including measurement principle and method of evaluation. Effect of mineral admixtures with high content of amorphous SiO2 is summarized the available scientific articles. In the experimental part, the effects of impurities with a high content of amorphous SiO2 on the rheological properties of fresh cement paste. It was tested by substitution of up to 10 % by weight of cement in the cement pastes mineral admixtures of different chemical composition, particle size and pozzolanic activity. Flow measurement was measured yield value, viscosity, and flow index. The stability of cement pastes was investigated oscillatory measurements. To complement the behavior pastes in the fresh state was determined by calorimetry. Test results were compared with those determined by reference samples and compared the effect of various ingredients.
|
|
|
Rheological properties of building binders in their fresh state
Hegrová, Michaela ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
This thesis is devoted to the rheological properties of building binders. The theoretical part focuses on individual types of building binders, their rheological properties and basic parameters determinated during the rheological characterization of building binders. The practical part deals with the resultes obtained from the meansurements on a rotational rheometr using the geometry type of plate to plate. These results are subsequently evaluated.
|
|
|
Hydrodynamic dampers on the principle of magnetic fluid
Přikryl, Matěj ; Fialová, Simona (referee) ; Pochylý, František (advisor)
This diploma thesis covers the topic of magnetic fluids and their utilisation in hydrodynamic dampers. The first part of the work consists of research on the current state of technology in hydraulic dampers with the focus on dampers using magnetorhelogical fluid. This chapter is followed by research on magnetic fluids with regard to their physical properties and mathematical description, which is used for CFD simulation of flow. The second part deals with the computational simulation of the flow of MR liquid in real MR damper in order to determine the damping characteristic and it's comparison with the experimental data.
|
|
|
Influence of cellulose ethers on rheological properties of lime
Hegrová, Michaela ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
The subject of this diploma thesis is a study of the influence of cellulose ethers on the rheological properties of lime. The theoretical part focuses on rheological parameters, techniques and test equipment used in rheology measurements. Various types of cellulose ethers and their influence on the rheological properties of fresh mortars are described. The practical part deals with the study of the influence of different types and quantities of cellulose ethers on the properties of fresh lime pastes and mortars. The results were obtained from measurements on a rotational rheometer with a special geometry for building materials. Measuring methods used were flow and oscillatory tests. Yield stress, viscosity and flow index were determined by the flow measurement. The stability and stiffness of fresh materials were determined during the oscillation measurements. The measured results are then evaluated and compared.
|
|
|
Adhesive and rheological properties of chitosan-based mixtures in media of different pH
Omar, Alaa Abdel Gawad Ahmed Osman ; Šnejdrová, Eva (advisor) ; Mužíková, Jitka (referee)
Title of thesis: Adhesive and rheological properties of chitosan-based mixtures in media of different pH Author: Alaa Omar Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The aim of the diploma thesis is the study of rheological and adhesive properties of tableting materials for matrix tablets based on chitosan. The theoretical part describes in detail the materials used to prepare the matrix tablets, which were chitosan, sodium alginate and hypromellose. The experimental section was focused on the flow and adhesive properties of the chitosan-based mixtures after exposing them to a media of different pH. The flow tests were done on an absolute rotational rheometer. Obtained viscosity curves were analysed by Power law model. Viscosity at 10 s-1 and Power Law model coefficients were used to evaluate and compare the flow behaviour of dispersions with different concentrations of retarding component in different media. The test of adhesion was carried out using a pull away test on a rotational rheometer and evaluated as maximal detachment force. The remarkably high viscosity of 5% dispersions at pH 1.2 is due to the dissolution of chitosan, as sodium alginate is not soluble in acidic media. The increase in viscosity with the concentration of the retarding component is insured...
|
|
|
Adhesive and rheological properties of chitosan-based mixtures in media of different pH
Omar, Alaa Abdel Gawad Ahmed Osman ; Šnejdrová, Eva (advisor) ; Mužíková, Jitka (referee)
Title of thesis: Adhesive and rheological properties of chitosan-based mixtures in media of different pH Author: Alaa Omar Supervisor: PharmDr. Eva Šnejdrová, Ph.D. Consultant: Mgr. Juraj Martiška The aim of the diploma thesis is the study of rheological and adhesive properties of tableting materials for matrix tablets based on chitosan. The theoretical part describes in detail the materials used to prepare the matrix tablets, which were chitosan, sodium alginate and hypromellose. The experimental section was focused on the flow and adhesive properties of the chitosan-based mixtures after exposing them to a media of different pH. The flow tests were done on an absolute rotational rheometer. Obtained viscosity curves were analysed by Power law model. Viscosity at 10 s-1 and Power Law model coefficients were used to evaluate and compare the flow behaviour of dispersions with different concentrations of retarding component in different media. The test of adhesion was carried out using a pull away test on a rotational rheometer and evaluated as maximal detachment force. The remarkably high viscosity of 5% dispersions at pH 1.2 is due to the dissolution of chitosan, as sodium alginate is not soluble in acidic media. The increase in viscosity with the concentration of the retarding component is insured...
|
|
|
Influence of particle size of cosmetic pigments on final properties product
Obručová, Kateřina ; Hurčíková, Andrea (referee) ; Zemanová, Jana (advisor)
This diploma thesis is focused on the study of the influence of the of size cosmetics pigments on the properties of the final product. This effect was studied on samples of make-up given by industry partner. Make-up samples were measured by the rheology method and the yield stress of all samples was determined. Scanning electron microscopy was used to determine the size and shape of the pigment particles. Particle size was also measured by dynamic light scattering, but the results were influenced by forming aggregates. To easier determination of the types of pigments in the sample was determined elemental composition of the pigments (Ti, Fe, O, Al) by EDS detector. Due to the unknown composition of make-up, the information was supplemented by X-ray powder diffraction (XRD) analysis, and it was possible to determine the compounds TiO2 (anatase and rutile), FeOOH and Fe2O3. The results obtained by these methods showed what pigments can be found in make-up samples, what their sizes and shapes are. It has been shown that the smaller the pigments are, the higher the viscosity and yield stress of the final product. The higher these quantities, the harder it is to handle the product.
|
|
|
Influence of cellulose ethers on rheological properties of lime
Hegrová, Michaela ; Rovnaník, Pavel (referee) ; Vyšvařil, Martin (advisor)
The subject of this diploma thesis is a study of the influence of cellulose ethers on the rheological properties of lime. The theoretical part focuses on rheological parameters, techniques and test equipment used in rheology measurements. Various types of cellulose ethers and their influence on the rheological properties of fresh mortars are described. The practical part deals with the study of the influence of different types and quantities of cellulose ethers on the properties of fresh lime pastes and mortars. The results were obtained from measurements on a rotational rheometer with a special geometry for building materials. Measuring methods used were flow and oscillatory tests. Yield stress, viscosity and flow index were determined by the flow measurement. The stability and stiffness of fresh materials were determined during the oscillation measurements. The measured results are then evaluated and compared.
|
|
|
Hydrodynamic dampers on the principle of magnetic fluid
Přikryl, Matěj ; Fialová, Simona (referee) ; Pochylý, František (advisor)
This diploma thesis covers the topic of magnetic fluids and their utilisation in hydrodynamic dampers. The first part of the work consists of research on the current state of technology in hydraulic dampers with the focus on dampers using magnetorhelogical fluid. This chapter is followed by research on magnetic fluids with regard to their physical properties and mathematical description, which is used for CFD simulation of flow. The second part deals with the computational simulation of the flow of MR liquid in real MR damper in order to determine the damping characteristic and it's comparison with the experimental data.
|
guest ::
